3mm Levelling Spacers

3MM STANDARD HEIGHT LEVELLING SPACER

These spacers are part of the Tile Rite levelling spacer system for perfect tile-to-tile levelling.

Levelling wedges sold separately.

• Use with levelling wedges for perfect tile-to-tile alignment
• Designed for fitting large format Porcelain, Marble & Stone tiles up to 12mm thick
• Ensures an even 3mm grout line
• May be combined with regular tile spacers for joints up to 6mm
• For wall & floor tiles
  

INSTRUCTIONS FOR USE:

1. Apply tile adhesive according to manufacturer' instructions. Slide two levelling spacers approximately 100mm from each end of the tile. Place the next tile.
2. Slide a reusable wedge into each spacer. Tighten until the tiles are snug against the bottom of the wedge. Use the special pliers to easily drive wedges into levelling spacers. Adjust the tile so that the sides are aligned and the tiles are pushed tightly against the levelling spacer.
3. Let adhesive dry as required by manufacturers instructions. To remove the wedges kick the side of the levelling spacer to snap them off and keep the wedges for future use. Can also be used for levelling wall tiles. Use a non marking rubber mallet to snap the spacers.